Robinson Laser
RPS®QuickLinkRPS®RealTime RPS®PriceCheck
Skip Navigation Links
Home
Check Part
Catalog
Information
RPS® Standard Laser Tolerances

RPS® Standard Laser Tolerances

Factor Metric Standard
Positioning ±0.075 mm/m ±0.003 in/40 in
Repeatability ±0.025 mm/m ±0.001 in/40 in
Kerf ±0.10 mm/m ±0.004 in/40 in
Flatness 0.8 mm/m 0.031 in/40 in
  • All Parts will be produced from RPS® Sheet & Plate.
  • All dimensions will be produced to RPS® Standard Laser Tolerances, unless otherwise agreed.
  • Measurment capabilites are ±0.002 inches of actual product dimensions when required.
  • Positioning: The ability of the machine to move accurately to a specified location along a specified path.
  • Repeatability: The ability of the machine to move consistently to a specified location.
  • Kerf: The possible change in the laser beam radius during cutting along the part edge.

Electronic Drawing File Preferences

  • The drawing must be in Full (1:1) scale.
  • The drawing must be 1 complete two-dimensional flat pattern drawing.
  • Any etching or marking must be on a Layer called:
    • ETCH
  • At this time, spline, polyline, and ellipse objects are not supported.
  • The drawing must be in Imperial System units (e.g. inches, feet.)
  • The Part's geometry must be on one of the following Layers unique from other elements of the drawing.
    • 0
    • 205
    • GEOMETRY
    • WHITE
Privacy Statement Terms of Use Feedback Contact Us

4303 Kennedy Avenue, East Chicago, Indiana 46312
1-800-FOR-FLAT (1-800-367-3528) FAX: 219-398-7735
rps@robinsonlaser.com

Copyright© 2001-2012, Robinson Laser, LLC. All Rights Reserved.
RPS® and Robinson Laser™ logo are registered trademarks of Robinson Laser

ISO Certified